Short, one-off jobs usually favour hiring site CCTV, while longer or repeat jobs usually favour buying kit that your own installer can redeploy. The crossover is a month count: add the kit purchase, your installer's fitting, and removal and reinstatement, then divide by the monthly hire charge, including any monitoring and data SIM. Neither side of that sum can be fixed in advance, so use a current hire quote and current product prices rather than any rule of thumb. CCTV Master sells equipment but does not hire it out or install it, so treat this as a way to test the quotes you receive.
How many months before buying site CCTV beats hiring it?
Buying wins once your months on site exceed total ownership cost divided by the monthly hire charge, and you have to run that sum with your own quotes.
The formula
months = (kit purchase + your own installer's fitting + removal and reinstatement) ÷ monthly hire charge
Put monitoring and the data SIM inside the monthly hire charge if the hire quote bundles them. If you would still pay for a SIM or monitoring on owned kit, strip that from the hire figure so both sides compare like with like. Read the hire quote live from the hire company, and read kit prices live from the product pages.
The decision rule
Compare the result with the months your programme will really run.
- Your job is shorter than the result: hire. This suits a short, defined job such as a single refurbishment.
- Your job is longer than the result: buy. This suits a long programme, or a business that moves from site to site and reuses the kit.
The hybrid case
Portable kit you redeploy changes the sum. The kit cost is spread across every project it serves, but fitting and removal recur each time, so run the formula per project.
On a long-term yard or depot, a fixed install is never removed, so that term falls away and break-even arrives sooner. It will probably end in a site office, so budget the screen too. Our guide to choosing the right monitor screen covers that.
We sell equipment and do not hire it, so the buy side of this comparison is our offer. For a very short job, hire is genuinely the better fit. If you buy, your own electrician or an independent NSI or SSAIB installer fits it, following the product's datasheet or installation guide.
What does temporary site CCTV hire cover, and what costs extra?
Hire normally covers the camera unit for an agreed period, while monitoring, call-outs and mobile data may be priced separately, so read each quote line by line.
Unit types
Most short-term hire falls into three formats: mobile towers, solar-assisted units and 4G battery units. Towers suit sites that need height and a clear view over hoarding. Battery and solar units suit sites with no mains supply, but they depend on charging and signal. Specifications differ between suppliers, so compare them on the quote.
Monitoring and call-outs
For 24/7 CCTV on a construction site, the key question is who sees an alert and what they do next. A unit that only records, or sends a notification to your phone, is not the same as a staffed monitoring service. Check the contract for whether monitoring is bundled or an add-on, and for how call-outs and false alarms are charged.
Ask the hire firm
- Is construction site CCTV monitoring included, or priced separately?
- Who responds to an alert, and does the contract say what a call-out costs?
- Who pays for the data SIM, and is there a fair-use cap?
- Has signal been checked on this site, not just the postcode?
- How does the battery or solar unit perform in winter, with short days and low sun?
- What is the minimum term, and what are the early-termination charges if the build finishes sooner?
What does a permanent hardwired site install cost beyond the cameras?
Beyond the cameras, budget for the recorder, PoE switch, cabling, power, an enclosure, your installer's labour and commissioning. Camera price is often the smaller part of a permanent build.
- Recorder (NVR): drives are supplied pre-fitted when you buy one with a recorder, so storage doesn't need a separate fitting step.
- PoE switch: port count and total power budget must match the camera count, which is why we cover switch sizing in a separate guide.
- Cabling: every camera needs its own run plus terminations. Our Cat6 versus cat5e comparison covers which to specify.
- Power and enclosure: a mains supply at the recorder position and a lockable cabinet to house the kit.
- Labour: CCTV Master sells equipment and does not install it, so fitting is by your own electrician or installer. Each product's datasheet and installation guide set out what they need to follow.
- Commissioning: aiming, configuring and testing every camera before handover.
For fitting, use an independent NSI or SSAIB-accredited installer of your choosing. Our installer-hiring guide explains what to ask them.
Larger yards and units add more camera positions, and so more cable and switch ports. Counting positions with CCTV for Warehouses UK: Zone-by-Zone Camera Planning before you price keeps those lines honest.
For commissioning and cable checks, the Rsrteng IPC-5100C Plus tester costs £274.62 including VAT. It has a 5.4" screen and a built-in cable tracer, and it can configure cameras on site.
What are the GDPR, signage and retention duties for temporary footage?
Temporary footage carries the same UK GDPR duties as permanent footage: a defined purpose, visible signage, a justified retention period and, sometimes, a data protection impact assessment (DPIA). A short deployment does not switch these off.
The site operator is usually the controller, because it decides why the cameras are there and what happens to the recordings. Following the ICO's CCTV guidance, write the purpose down (theft, vandalism, health and safety) and keep it specific. Signs should be visible before people enter the camera's view and should typically say who operates the system, why, and how to contact them. A DPIA may be needed depending on the setup, for example where cameras cover workers' welfare areas or the public footway.
Retention and storage
No single legal period applies. Keep footage no longer than your stated purpose needs, then overwrite or delete it. For a 24/7 site, size the recorder from that period:
storage = cameras × bitrate × 86,400 seconds × retention days ÷ 8
With bitrate in Mbps, the result is in megabytes, so divide by 1,000,000 for terabytes. Use your chosen retention days, not the recorder's maximum, and take the bitrate from each camera's own stream settings.
Can your employer watch you on CCTV at work?
Yes, but only with a justified purpose and transparency, which means signage and clear information for staff. Covert monitoring is exceptional and needs a strong, documented reason. The same logic applies to staff areas in other settings, as in our CCTV for restaurants guide covering zones, kitchen cameras and GDPR.
Hired versus owned kit
On a hired unit, the hire company may supply and maintain the hardware, but the site operator usually remains controller unless the contract says otherwise. With owned kit, you control the footage directly and carry every duty above.
How do you plan the exit, and survey the site before you decide?
Walk the site first and record power, signal, mounting points, line of sight, duration and access, then plan removal and data disposal before you buy or hire anything.
Site survey sequence
- Power: find where mains is available at each camera position, or whether the site only has a temporary supply. Ask who controls it and whether it is switched off out of hours.
- 4G/5G signal: test on the network you intend to use, at mounting height rather than at ground level. Signal can differ from one corner of the site to another.
- Mounting points: identify what is fixed and what will move, such as scaffold, hoarding or a temporary cabin. Your own electrician or an independent installer fits the kit, and the product datasheet states its mounting requirements.
- Line of sight: check each view for obstructions, and picture how stacked materials, cranes and the building itself will change it as work progresses.
- Duration: how long the site runs decides whether hiring or owning makes sense.
- Access: settle who holds the admin login and who may view footage. Our guide on who owns the footage in shared buildings covers the multi-party case.
For wired runs, a handheld tester with a cable tracer, such as the Rsrteng IPC-5100C Plus, checks cabling and camera output on site.
Removal and reinstatement
Plan for your installer to remove the fixings and make good the surfaces. On hired kit, ask whether the supplier charges a collection fee before you sign.
Owned kit can be returned to stock or redeployed to the next site. Resale is an option if the cameras and recorder are still in working order.
Before anything leaves, decide what footage you must keep, such as material tied to an incident, and securely erase the rest from the recorder's drives. Keeping only what you need also fits UK GDPR data-minimisation principles.
Remote viewing
To watch live footage, use the manufacturer's app or a secure VPN. Never open ports on a site router, because that exposes the recorder directly to the internet. The same rule applies if you want to connect a camera to a website: don't publish the recorder's address.
Buying
In-stock items ordered before 4pm Monday to Friday are dispatched the same working day. Items on back order can be requested by quote or delivery arrangement. You can shop at CCTV Master or ask about trade pricing for larger site orders.
