Product Description
What the UT-1270 is for
This is a 12V 7Ah sealed lead acid (SLA) battery — the backup power source that keeps a CCTV recorder, alarm panel or emergency light running when the mains supply cuts out.
Key specs
- Voltage/capacity: 12V, 7Ah — sized for standby and cyclic use rather than heavy continuous load
- Chemistry: valve regulated lead acid (VRLA) — sealed, so no topping up and no acid to spill
- Terminals: F1 Faston spade connectors, 4.8mm — the standard fit for most alarm and CCTV backup trays
- Build: leak-proof sealed case, so it can sit in most orientations inside an equipment housing
Where it fits
Because the terminals are the common F1 size, this battery is a straightforward swap in most UPS units, alarm control panels, CCTV DVR/NVR backup compartments and emergency lighting fittings that already take a 12V 7Ah SLA battery — but always check your existing battery's terminal type and dimensions before ordering, since not every housing takes the same size.
Buying checks
- Confirm your panel or UPS is rated for 12V 7Ah — a mismatched capacity can shorten runtime or strain the charger.
- Sealed lead acid batteries age with use and time; if backup runtime has been dropping, replacing the battery rather than the whole unit is usually the cheaper fix.
- Keep it in a dry, temperature-stable spot — SLA batteries are built for controlled environments, not outdoor exposure.
Technical Specifications
Frequently Asked Questions
What size terminals does the UT-1270 use?
F1 Faston spade connectors measuring 4.8mm, the common fit for CCTV and alarm backup batteries.
Is this battery maintenance-free?
Yes — it uses valve regulated lead acid (VRLA) sealed construction, so there's no topping up required.
Can I use the UT-1270 in a UPS or emergency lighting unit?
It's designed for standby and cyclic use in UPS systems, alarms, CCTV backup units and emergency lighting, provided the unit takes a 12V 7Ah battery with F1 terminals.
Can the battery be fitted in any position?
Its sealed, leak-proof construction allows installation in various orientations within equipment housings or battery compartments.










