Product Description
A kettle lead (the common name for a BS1363 UK mains plug into an IEC C13 socket) is what powers most rack gear — the KETTLE-LEAD-2M-Extension-Cable is 2m of exactly that, built for NVRs, DVRs, switches and PSUs with a standard IEC C14 inlet.
What it's for
This cable runs from a UK wall socket or a PDU (power distribution unit, the multi-socket strip in a rack) to any device with an IEC C14 inlet — the recessed three-hole socket found on most NVRs, servers, monitors and network switches. At 2m it gives noticeably more reach than a 1–1.5m lead, useful when the PDU sits at the back of a cabinet and equipment is mounted mid- or upper-U.
Key specs
- Length: 2m
- Cable: H05VV-F 3-core, 0.75mm², PVC insulated
- Rating: typically up to 10A at 250VAC (roughly 2300W maximum)
- Plug end: moulded BS1363 UK plug, fitted with a 5A or 10A fuse depending on variant
- Socket end: moulded IEC C13 female connector with strain relief
- Approval: BSi/ASTA approved construction
- Sheath: black PVC, for indoor use
Where it fits
In a CCTV installation this is the lead sitting between a rack PDU or UPS and the recorder, monitor or switch — standardising every connection in the cabinet to the same IEC C13 fitting, which simplifies spares and swaps. It's an equipment lead only; it doesn't extend a fused spur or replace a properly rated power supply for cameras.
Specifications
- Product Type
- IEC C13 Kettle Lead
- Plug Type
- UK BS1363 3‑pin fused
- Connector Type
- IEC C13 female
- Cable Length
- 2
- Cable Standard
- H05VV‑F
- Current Rating
- 10
- Max Power
- Up to approx. 2300 W
- Fuse Rating
- 5A or 10A (model dependent)
- Jacket Material
- PVC
- Colour
- Black
- Approvals
- BSi / ASTA / UK mains compliant
Frequently Asked Questions
What does the KETTLE-LEAD-2M-Extension-Cable actually connect?
It runs from a standard UK BS1363 wall or PDU socket to an IEC C13 female connector, which plugs into any device with an IEC C14 inlet, such as an NVR, switch or server PSU.
What's the maximum load this cable can carry?
It's typically rated up to 10A at 250VAC, around 2300W maximum, using 0.75mm² H05VV-F cable.
Is the plug fused?
Yes, the moulded BS1363 plug is fitted with either a 5A or 10A fuse depending on the specific variant.
Why choose the 2m length over a shorter lead?
The extra length gives more slack for routing from a rack PDU to equipment mounted mid- or upper-U, or from a wall socket to a nearby cabinet, compared with a 1–1.5m lead.
