Product Description
The Hikvision DS-KIS702-P(B) is a complete video door entry kit for a single house or villa entrance — no need to source parts separately.
What's in the box
- DS-KD8003Y-IME2 door station: surface-mount, built-in camera, one call button
- DS-KH6320Y-WTE2 indoor monitor: touch screen for answering calls, viewing visitors and releasing the door lock
- DS-KAD704Y two-wire distributor module
- Power supply unit, power adapter, and a 16GB TF card for storing snapshots and messages
Why "2-wire" matters
Ordinary intercoms often need multi-core cable for power and video separately. This kit runs both over a single 2-wire connection, which is what makes it practical for retrofitting into a house that already has old intercom wiring — you're not pulling new cable through walls.
Where it fits
This is built for one entrance, one household — a single call button means visitors reach one indoor monitor, not a bank of flats. It suits villas, houses and small standalone buildings rather than multi-tenant or multi-door setups.
Storage and missed calls
The included 16GB TF card records snapshots and messages from visitor calls, so if you're out when someone rings the door station, you can review who called and what they left when you're back at the monitor.
This listing covers equipment supply only — check your own wiring run and door lock compatibility before ordering.
Specifications
- Operating System
- Embedded Linux operation system
- Operation Mode
- One touch key
- Backlight Compensation
- Support
- Digital Noise Reduction
- Support
- Field of View
- Horizontal 146°, vertical 82°
- Video Compression
- H.264
- Motion Detection
- Support
- Flash-Avoid Frequency
- 50 Hz, 60 Hz
- Audio Input
- Built-in omnidirectional microphone
- Audio Output
- Loudspeaker, 20 cm sound effect > 80 db
- Audio Quality
- Noise suppression and echo cancellation
- Audio Compression
- G.711 U
- Audio Compression Bitrate
- 64 Kbps
- Audio Intercom
- Full-duplex two-way audio intercom
- Network Protocol
- TCP/IP, RTSP, IPV6, ONVIF
- Alarm Input
- 4 (2 exit butttons and 2 door contacts by default)
- Lock Control
- 2 (2 relay, max to 30 VDC, 2 A)
- Power Supply
- Two-wire
- Operating Temperature
- -40 °C to 60 °C (-40 °F to 140 °F)
- Operating Humidity
- 10% to 90%
- Installation
- Wall mounting
- IP Rating
- IP 65
- Power Input
- Powered by KAD704Y or KAD706Y series distributor
- Memory
- 128 MB
- Flash
- 32 MB
Technical Specifications
Frequently Asked Questions
What does the 2-wire design actually mean?
Power and video/audio signals travel over the same two-core cable, which is why this kit suits upgrading existing intercom wiring without pulling new cable.
How many doors or visitors can this kit handle?
The kit has one door station with a single call button connected to one indoor monitor, so it's designed for a single entrance and household, not a multi-door or multi-tenant setup.
Where do missed visitor calls get stored?
Snapshots and messages from visitor calls are saved to the included 16GB TF card in the indoor monitor, so you can review them later.
What's included with the kit?
You get the DS-KD8003Y-IME2 door station, DS-KH6320Y-WTE2 indoor monitor, DS-KAD704Y two-wire distributor, a power supply and adapter, and a 16GB TF card.
