Product Description
A KVM extender lets you put your DVR, NVR or PC in one room and operate it from a monitor and keyboard in another — this one does it over a single Cat5e/Cat6 cable, up to 60 metres (200ft) away.
How it works
The transmitter connects to your HDMI source (DVR, NVR, media PC). The receiver connects to your monitor. Run one Ethernet cable between them and you get 4K video, audio, and USB keyboard/mouse control all on that one link — no separate USB extension or audio cable needed.
Why CCTV buyers use it
If your recorder sits in a cupboard, server rack or plant room but you want a screen and keyboard at a front desk or control point, this removes the need to have the DVR/NVR within reach. Setup is plug-and-play — no drivers or software to install.
What to check before buying
- Cable matters: full 60m reach needs pure-copper Cat6 — cheaper CCA cable or long runs of thin Cat5e can shorten your usable distance.
- Point-to-point only: this connects one transmitter to one receiver directly; you cannot route it through a network switch.
- Box contents: HDMI-to-RJ45 transmitter, RJ45-to-HDMI receiver, two power adapters, and a manual.
Suits control rooms, server rooms, and any install where the recorder needs to be out of sight but still fully operable.
Technical Specifications
Frequently Asked Questions
What cable do I need for the full 60m range?
Pure-copper Cat6 is recommended to reach the full 60 metres (200ft); lower-quality or CCA cable may reduce the usable distance.
Can I connect it through a network switch?
No — this is a point-to-point connection, so the transmitter must connect directly to the receiver with no switch in between.
Does it need drivers or software?
No, it's plug-and-play — connect the transmitter to your HDMI source and the receiver to your monitor and it works immediately.
What's included in the box?
One HDMI-to-RJ45 transmitter, one RJ45-to-HDMI receiver, two power adapters, and a user manual.
