Product Description
The Cat6 RJ45 Keystone Jack Wall Socket gives you a fixed, wall-mounted point to plug network gear into, rather than a cable end trailing across the floor.
What it does
It terminates a Cat6 structured cabling run at the wall using a keystone jack, then lets you connect any device with a standard RJ45 patch lead. That includes IP cameras, wireless access points, computers and NVRs — relevant if you're running a CCTV system over Ethernet rather than coax.
Why bother with a wall outlet
Once the fixed cable is terminated into the jack, you can swap, unplug or replace the connected device without touching the cabling behind the wall. That matters for CCTV jobs where a camera might need replacing or moving later — the wiring stays put, only the patch lead and device change.
Where it's used
- New Cat6 cabling installs
- Network extensions and upgrades
- Adding a dedicated Ethernet point for a camera, NVR or access point
- Tidying up a permanent installation instead of leaving loose cable ends
One thing to check
This is a termination point, not a complete cabling solution — how well the connection performs depends on the cable run itself, the quality of the termination, and the equipment plugged in at either end.
Specifications
- Cable Category
- CAT6
- Connector Type
- RJ45
Frequently Asked Questions
Can I use this with an IP camera or NVR?
Yes, once the Cat6 cable is terminated into the jack you connect the camera or NVR using a standard RJ45 patch lead.
Does the wall socket affect network performance?
Performance depends on the full cable run, termination quality and connected equipment, not the socket alone.
Is this suitable for a new installation or an upgrade?
It's designed for both — new cabling projects, network extensions, and adding a dedicated Ethernet point to an existing setup.
