Product Description
The SPL-4 is a 4-port lever connector for joining CCTV power and low-voltage cables without tools. Press the lever, insert the conductor, close it — no screwdriver or crimper needed.
It's built for 12V DC and 24V DC circuits, which covers the two voltages most CCTV camera power supplies run at. That makes it a practical choice when you're splitting one feed from a power supply unit out to several cameras, or joining wiring inside a junction box or camera back box.
Where it fits
- Camera back boxes and junction boxes where space is tight
- Splitting a centralised PSU feed across multiple cameras
- Alarm system wiring and LED circuit connections
What it works with
The four ports accept both solid and stranded copper conductors, so it suits typical CCTV power cable and alarm cable without needing to match a specific wire type. The housing is compact and insulated, sized to fit inside standard CCTV enclosures rather than open trunking.
Before you buy
Check the connector count you actually need — this is a 4-port block, so if you're feeding more than four conductors from one point you'll need an additional unit. Confirm your camera and PSU run on 12V DC or 24V DC, since that's what this connector is rated for.
Specifications
- Voltage
- 12V
- Colour
- Grey
Technical Specifications
Frequently Asked Questions
What voltages does the SPL-4 support?
It's suitable for 12V DC and 24V DC power distribution, which covers the common voltages used for CCTV camera power.
Do I need tools to connect wires?
No — it uses a tool-free lever clamp, so you just open the lever, insert the conductor and close it.
Can I use stranded cable with this connector?
Yes, it's compatible with both solid and stranded copper conductors.
Where is the SPL-4 designed to be installed?
It has a compact insulated housing meant for CCTV junction boxes, camera back boxes, and similar enclosures.
