Product Description
A lever nut is a tool-free wire connector: lift the lever, push in the stripped wire, press the lever back down, and a spring clamp grips it. No screwdriver, no crimping, no soldering.
The SPL-3-6 gives you 3 input ports and 6 output ports, so one incoming supply or signal cable can be split to feed six separate runs from a single connector body.
Where CCTV installers use this
Inside a junction box, this style of connector is handy for branching a single power feed out to several camera runs, or joining multiple conductors where cables meet. Because it's reusable, you can open the lever and reposition a wire if a run changes later — no re-crimping needed.
Key specs
- Ports: 3 in, 6 out
- Rating: approximately 250-450V, up to 32A
- Wire types: solid, stranded and flexible conductors
- Wire range: roughly 0.08mm² to 4mm² (28-12 AWG)
- Body: flame-retardant plastic housing, tinned copper internal contacts
Before you buy
Check the wire gauge you're working with sits inside the 28-12 AWG range above, and confirm your cable type (solid, stranded or flexible) is one this connector accepts — all three are supported here.
Specifications
- Brand
- Unbranded
- SKU
- SPL36/3-6
Technical Specifications
Frequently Asked Questions
What wire sizes does the SPL-3-6 accept?
Roughly 0.08mm² to 4mm², which covers 28-12 AWG, and it works with solid, stranded or flexible conductors.
Do I need tools to use it?
No — it's a lever-lock design: lift the lever, insert the stripped wire, press the lever down to clamp it.
Can I reuse the connector if I change a wiring run?
Yes, the SPL-3-6 is reusable, so you can open the lever and reposition a wire without needing a new connector.
What's the voltage and current rating?
Approximately 250-450V and up to 32A, suitable for standard lighting and junction box wiring.
