Product Description
A 30-metre CAT6 F/UTP patch cable, black, built for the runs where a shorter lead just won't reach — a camera at the far end of a garden, or an NVR in a cupboard away from the router.
Why the specs matter
F/UTP shielding (foiled twisted pair) cuts electromagnetic interference from mains cabling or fluorescent fittings nearby — useful if the cable route crosses either. The CAT6 rating supports 10/100/1000 networks, so it handles Gigabit speeds without being a bottleneck for CCTV footage or general data transfer.
The LSZH (Low Smoke Zero Halogen) jacket is worth checking against local fire regulations if you're running this cable through ducting in a commercial or multi-occupancy building. The snagless boot on each connector protects the clip when pulling the cable through tight spaces.
Key specs
- Length: 30m, black
- Category: CAT6, rated for 10/100/1000 networks
- Conductor: 26 AWG x 4 pair
- Shielding: F/UTP (shielded twisted pair)
- Jacket: LSZH
- Termination: snagless boot
- Standards: ISO/IEC 11801 and TIA/EIA 568B.2-1
Where it fits
Use this to connect a router, PC, PS4, CCTV camera or NVR where the distance between devices exceeds what a standard patch lead covers, without needing an in-line coupler that adds another point of failure.
Specifications
- Colour
- Black
- Connector Type
- RJ45
Technical Specifications
Frequently Asked Questions
Will this cable work with Gigabit network equipment?
Yes — it's CAT6 rated and suitable for 10/100/1000 networks, which includes Gigabit speeds.
Is this cable shielded against interference?
Yes, it's F/UTP (foiled twisted pair), which reduces electromagnetic interference on the run.
What does the LSZH jacket mean for my install?
LSZH stands for Low Smoke Zero Halogen — it's worth checking this against local fire regulations before installing in ducting or commercial buildings.
Can I use this for a long CCTV camera run?
Yes, at 30m it covers longer camera-to-NVR runs in one length, avoiding an extra joint or coupler partway along.
