Product Description
A 10m USB 2.0 extension cable, A male to A female, that uses active repeater technology built into the lead to keep the signal strong over the full length — a plain passive extension cable that long typically suffers data loss or drops the connection.
Where it fits
On a CCTV or general tech setup, this cable is normally used to run a USB peripheral — a webcam, capture dongle, card reader or similar — from a PC or NVR out to a spot further away than the device's own cable reaches. Think a control room, back-office counter, or reception desk where the host machine and the USB device sit some way apart.
What to check before buying
- Length: 10 metres, one continuous run
- Connectors: USB A male to USB A female
- Compatibility: works with USB 2.0 devices and is backward-compatible with USB 1.1
- Setup: plug-and-play, no drivers or software needed
- Colour: black
Because it's an active cable, it needs no separate power injection to make the 10m run work — the repeater electronics are built in. That's worth confirming against your own kit if you're comparing it to a plain passive lead, since the two aren't interchangeable at this length.
Specifications
- Product Type
- USB Extension Cable
- Cable Length
- 10 Meters
- Function
- Extends the reach of a compatible USB connection
- Applications
- Home, office and CCTV installations
Frequently Asked Questions
Is this a passive or active extension cable?
It's an active cable — it has repeater electronics built in to regenerate the USB signal over the full 10m length, unlike a plain passive lead.
Will it work with older USB devices?
Yes, it's compatible with both USB 2.0 and USB 1.1 devices.
Do I need to install drivers to use it?
No, it's plug-and-play — no additional drivers or software are needed.
What connectors does it use?
A USB A male plug on one end and a USB A female socket on the other.
