Product Description
A 3m HDMI lead for linking your recorder (DVR/NVR) to a monitor a short distance away — a rack cabinet to a nearby wall screen or desk display, for example. It's HDMI Type A male to male, so it plugs straight into standard recorder and monitor HDMI ports without adapters.
Key specs
- HDMI 2.0 Premium High Speed certified, supporting 4K@60Hz (3840x2160) at 4:4:4 chroma with HDR
- 18Gbps bandwidth — the headroom needed to carry full 4K colour without compression artefacts
- 30AWG OFC copper conductors with triple shielding (foil, braid and drain) to resist interference from nearby power supplies and switches
- Gold-plated pins for a reliable connection over repeated plugging in and out
- LSZH/PVC jacket, 6mm outer diameter, with moulded strain relief and a 72mm bend radius for tidy routing
- Backward compatible with HDMI 1.4, so it works with older 1080p recorders too
- Carries Ethernet, ARC, CEC and HDCP 2.2 signalling alongside the video
Before you buy
Check your recorder's HDMI output resolution actually supports 4K if that's what you're after — the cable itself won't upscale anything. Also confirm 3m is enough reach for your rack-to-screen distance, since this length has no active booster built in.
Specifications
- Product Type
- 4K High Speed HDMI Cable
- Connector Type B
- HDMI Type A Male (19-pin)
- Cable Length
- 3
- HDMI Version
- 2.0 Premium High Speed
- Max Resolution
- 4K (3840x2160) @60Hz
- Bandwidth
- 18 Gbps
- Shielding
- Triple Foil + Thin Plate
- Conductor Material
- Tinned Copper
- Wire Gauge
- 30 AWG
- Jacket Material
- LSZH / PVC
- Supported
- ARC, CEC, HDCP 2.2, Ethernet, HDR
- Bend Radius
- 72
- Colour
- Black
Frequently Asked Questions
Will this cable give me 4K picture from my recorder?
It supports 4K@60Hz at 18Gbps, but you'll only get 4K output if your recorder itself outputs 4K over HDMI.
Is this cable long enough to reach from my rack to a wall-mounted monitor?
It's 3m, which suits a typical rack-to-nearby-console or rack-to-wall span without needing an extender.
Does it work with older, non-4K recorders?
Yes, it's backward compatible with HDMI 1.4, so it'll work fine with 1080p equipment too.
What's the cable jacket made from?
It has an LSZH/PVC jacket, 6mm in diameter, with moulded strain relief for cable management.
