Product Description
What it does
This is a 10 metre HDMI Type A male-to-male cable for runs where the monitor, video wall or projector sits well away from the NVR or DVR rack — common in control rooms and small offices reviewing multiple camera feeds.
It's HDMI 2.0 High Speed certified, carrying 18Gbps of bandwidth, so it supports 4K@60Hz (3840x2160). It also handles 1080p@120Hz and multi-channel NVR HDMI outputs, and stays backward compatible with HDMI 1.4 sources if your monitor or recorder is older.
Build quality that matters at 10m
Over long runs, signal loss and interference are the real risks. This cable uses 24-28AWG OFC (oxygen-free copper) conductors with triple shielding (foil + double braid) and gold-plated contacts to keep the signal clean — useful when routed near CCTV power supplies or rack wiring. Ferrite cores further reduce EMI in busy rack environments. Jackets come in nylon braided or PVC variants, with overmoulded strain relief to survive repeated plugging and rack panel routing.
Extra features
Built-in ARC, CEC and Ethernet channel, plus support for HDR, Deep Colour, 3D and HDCP 2.2. Construction is active or passive depending on the model — check which you're buying if you're near the practical limit for passive HDMI runs.
Before you buy
Confirm your monitor or NVR output actually needs 4K@60Hz at this distance, and check whether your chosen variant is active or passive.
Specifications
- Product Type
- High Speed HDMI Cable
- Connector Type B
- HDMI Type A Male (19-pin)
- Cable Length
- 10
- HDMI Version
- 2.0 High Speed
- Max Resolution
- 4K (3840x2160) @60Hz
- Bandwidth
- 18 Gbps
- Shielding
- Triple (Foil + Double Braid)
- Conductor Material
- Oxygen-Free Copper (OFC)
- Wire Gauge
- 24-28 AWG
- Jacket Material
- PVC / Nylon Braid
- Outer Diameter
- 7-10
Frequently Asked Questions
Will this cable support 4K video from my NVR?
Yes — it's HDMI 2.0 High Speed certified with 18Gbps bandwidth, supporting 4K@60Hz (3840x2160).
Is 10m too long for a stable signal?
The cable uses 24-28AWG OFC copper with triple shielding and gold-plated contacts specifically to maintain signal integrity over this length, though whether a particular unit is active or passive depends on the model.
Can I use this with an older HDMI 1.4 device?
Yes, it's backward compatible with HDMI 1.4 sources.
Does it carry audio back to a receiver?
Yes, it supports ARC (Audio Return Channel) along with CEC and an Ethernet channel.
