Product Description
A 1m HDMI cable in black, built for the short hop between an NVR and a nearby monitor rather than long wall runs. HDMI-A male to male, HDMI 2.0 Premium High Speed certified.
Handles full 4K. 18Gbps bandwidth carries 4K@60Hz (3840x2160) at 4:4:4 chroma with HDR, so multi-camera mosaics stay sharp rather than dropping to a compressed colour mode. Deep Colour processing and 7.1 multi-channel audio are also supported, useful if your monitor or receiver handles surround sound from camera feeds.
Built for rack conditions. 30-34AWG oxygen-free copper conductors sit inside triple shielding (foil plus braid), which the cable is rated as EMI-immune for — worth knowing if it's running alongside Cat6, PoE injectors or CCTV power supplies in a packed cabinet. Gold-plated pins are tested for 10,000+ mating cycles, and the build is ultra-flexible with moulded strain relief, so repeated swaps during commissioning or fault-finding shouldn't wear out the connectors.
Key specs
- Length: 1m, HDMI-A male to male
- Jacket: PVC, 5-6mm outer diameter, 25mm bend radius
- Support: ARC, CEC, HDCP 2.2 (needed for protected 4K content), Ethernet channel
- Backward compatible with HDMI 1.4 for 1080p@120Hz sources
Also listed under SKU UNB-HDMI-CABLE-4K-1M.
Specifications
- Product Type
- 4K High Speed HDMI Cable
- Connector Type A
- HDMI Type A Male (19-pin)
- Connector Type B
- HDMI Type A Male (19-pin)
- Cable Length
- 1
- HDMI Version
- 2.0 Premium High Speed
- Max Resolution
- 4K (3840x2160) @60Hz
- Bandwidth
- 18 Gbps
- Shielding
- Triple (Foil + Braid)
- Conductor Material
- Oxygen-Free Copper (OFC)
- Wire Gauge
- 30-34 AWG
- Jacket Material
- PVC
- Outer Diameter
- 5-6
- Contacts
- Gold-plated
- Supported Features
- ARC, CEC, HDCP 2.2, Ethernet, HDR
- Colour
- Black
Technical Specifications
Frequently Asked Questions
Will this cable show protected 4K content from streaming apps or set-top boxes?
Yes — it supports HDCP 2.2, which is what protected 4K sources require.
Is 1m long enough for a rack-to-monitor connection?
It's designed for short runs like NVR-to-local-monitor or intra-rack connections, not long wall runs.
Will it work with an older 1080p device?
Yes, it's backward compatible with HDMI 1.4 for 1080p@120Hz sources.
Does it cause interference issues near other cabling in a rack?
It's rated EMI-immune and triple-shielded, so it's built to sit near Cat6 bundles, PoE injectors and CCTV PSUs without picking up interference.
