Product Description
A grey PVC junction box rated IP65 — sealed against dust and protected against low-pressure water jets — for housing cable joints, connectors or small power supplies outside. If your camera cable run has a mid-point splice, a PSU, or a balun sitting exposed on a wall, this is the box that keeps it dry and out of reach.
What it's for
Fit it anywhere a CCTV, network or general electrical connection needs to sit outdoors: at the base of a pole camera, behind an NVR run, or wherever you're joining cable rather than running one continuous length. Wall-mountable, with a plain enclosure so you drill your own cable entry points wherever suits the run.
Key specs
- IP rating: IP65 (dust-tight, protected against water jets)
- Material: durable PVC, built for outdoor exposure
- Internal dimensions: approx. 240 × 180 × 130 mm — enough room for terminal blocks, a small PSU, and slack cable
- Entry points: not pre-cut; drilled by the installer to suit the job
- Mounting: wall-mounted
Before you buy
Measure what you're putting inside first — power supplies and terminal blocks take up more room than expected once cable slack is added. Because entry points aren't pre-drilled, you'll need a suitable drill bit or hole saw and cable glands to keep the IP65 seal intact once you've made your holes.
Specifications
- IP Rating
- IP65
- Dimensions
- 240 × 180 × 130 mm
- Colour
- Grey
Frequently Asked Questions
Is this box actually waterproof, or just splash-resistant?
It's rated IP65, meaning it's dust-tight and protected against low-pressure water jets from any direction — suitable for outdoor use, though it isn't rated for submersion.
Does it come with pre-cut holes for cables?
No — the enclosure is adaptable, so you drill your own entry points wherever the cable run needs them, then seal with glands to maintain the IP65 rating.
Will a CCTV power supply fit inside?
The internal space is roughly 240 × 180 × 130 mm, which the listing describes as large enough for terminal blocks, power supplies and cable slack, so a small PSU should fit — worth measuring your specific unit first.
Can it be mounted outside on a wall?
Yes, it's designed to be wall-mounted and is commonly used for CCTV camera installations and other outdoor electrical junction points.
