Product Description
This is a grey PVC junction box rated IP65 for dust and water-spray protection, aimed at housing cable joins and terminal blocks outdoors or indoors.
Note on dimensions: the product title lists 110 x 100 x 45mm, but the detailed spec on this listing gives 100 x 100 x 70mm. These two figures conflict. Before ordering, check which measurement matches the space you're fitting it into, or confirm with the supplier first.
Where it fits on a CCTV job
- Camera drops and mid-run points — sealing a connector, balun or power joint instead of taping it inside trunking.
- Networking runs — a weatherproof point for joining or patching external cable.
- General wiring — any outdoor or indoor junction that needs protection from dust and rain.
Build
The enclosure is PVC, chosen for weather resistance and structural strength rather than for heavy-duty impact protection. It's an adaptable enclosure, meaning you cut your own cable entry points to suit the job rather than relying on pre-made glands — useful if your cable sizes vary from run to run.
It can be wall-mounted, which helps keep an outdoor junction tidy rather than left loose in trunking or hanging off a cable run.
Specifications
- IP Rating
- IP65
- Dimensions
- 110 × 100 × 45 mm
- Material
- PVC
- Colour
- Grey
Frequently Asked Questions
What is this box actually used for on a CCTV install?
It houses cable joins, terminal blocks or small components at a camera drop or mid-run point, keeping them out of the weather instead of taped inside trunking.
What size is the enclosure?
The listing title says 110 x 100 x 45mm, but the page's detailed spec says 100 x 100 x 70mm — these conflict, so check with the supplier before ordering if exact fit matters.
Does it come with cable entry holes already made?
No, it's described as an adaptable enclosure, meaning you create your own cable entry points to suit your installation.
Can it be used indoors as well as outdoors?
Yes, the source describes it as suitable for both outdoor and indoor use.
