Product Description
A 30m Cat6 patch lead is a fixed-length cable, not a spool — it runs one RJ45 connector to another over 30 metres, so measure your run before buying: this length suits linking a camera or recorder across a garage, outbuilding, or loft-to-office distance in one unbroken cable.
Cat6 here means the cable is rated to carry 250MHz of bandwidth, which supports high-speed data and HD video traffic without the connection dropping out — useful for CCTV recorders as well as general networking.
Why the build matters
- U/UTP (Unshielded Twisted Pair) construction: the pairs are twisted to resist electromagnetic interference without extra shielding, keeping the cable slim and flexible for tight runs.
- 24AWG copper conductors with gold-plated copper alloy pins on the RJ45 connectors, aimed at a stable, low-resistance connection.
- PVC jacket, 5.8mm diameter, rated for use between -10°C and 60°C — fine for most indoor and sheltered installs, though check exposure if routing outdoors.
- Minimum bend radius of 69mm — avoid tighter bends when routing round corners or through conduit, as this can affect signal quality.
- Blue jacket, useful for telling network runs apart from power or coax cabling in a multi-cable install.
For CCTV use, this cable carries data between an IP camera and an NVR (network video recorder); it does not carry power, so PoE devices still need a PoE injector or switch unless stated otherwise on the camera itself.
Specifications
- Cable Category
- CAT6
- Length
- 30m
- Colour
- Blue
- Connector Type
- RJ45
Technical Specifications
Frequently Asked Questions
Will this cable work for connecting an IP camera to an NVR?
Yes — Cat6 is a standard choice for IP CCTV, carrying data between camera and recorder over the full 30m length; it doesn't supply power, so PoE still needs a supporting injector or switch.
Is this cable shielded against interference?
No, it's U/UTP (unshielded twisted pair) — the twisted pairs alone reduce electromagnetic interference, which is normally adequate for typical home and office runs.
Can I bend this cable sharply around a corner?
Try to keep bends no tighter than the stated minimum bend radius of 69mm, as sharper bends can affect signal performance.
What temperature range can this cable handle?
It's rated for operating temperatures of -10°C to 60°C, so it suits most indoor and sheltered installs but check suitability for fully exposed outdoor runs.
