Product Description
Cat6 4m RJ45 patch lead: what it's for
This is a 4-metre Cat6 network cable with RJ45 plugs on each end, used to physically connect a device — a PC, NVR, PoE switch, or router — to your network. Cat6 is a cable spec built for faster, more stable data transmission than older Cat5e leads, which matters if you're running high-resolution CCTV footage or streaming across the network.
Where it fits in a CCTV setup
Four metres is a short-to-medium patch length — think router-to-switch, switch-to-NVR, or bridging a short gap between a wall socket and a camera's PoE injector. It's not intended as a long camera run; for longer distances between a camera and recorder, you'd normally look at a longer-length Cat6 cable rated for the run.
Before you buy, check:
- Length — 4m is fine for equipment sitting close together; measure your actual run first, including any slack for routing round corners or through walls.
- Connector compatibility — standard RJ45 plugs work with any Cat6-compatible port, including most NVRs, PoE switches and routers.
- Interference — Cat6 construction is designed to reduce interference, which helps keep a stable connection for continuous video streaming rather than a signal that drops out under load.
Suits home networks, small office setups, and as a supporting cable within a CCTV installation.
Specifications
- Cable Category
- CAT6
- Length
- 4m
- Colour
- Blue
- Connector Type
- RJ45
Frequently Asked Questions
Is 4 metres long enough to run from a camera to my NVR?
It depends on the distance between them — 4m suits short runs like router-to-switch or switch-to-NVR; measure the actual path first, including any slack needed.
Will this work with my PoE switch or NVR?
Yes — it uses standard RJ45 connectors, which are compatible with any Cat6-compatible port on routers, switches and NVRs.
What's the benefit of Cat6 over older cable types?
Cat6 is built for faster, more stable data transmission and reduced interference, which helps keep video streaming and file transfers consistent.
