EZ-IP EZAP005 CCTV Dome Camera Mount Adapter Plate

The EZ-IP Dome CCTV Camera Adapter Plate (EZAP005) is a simple fix for a common wiring-day headache: your dome camera's base doesn't quite line up with the bracket or junction box already on the wall or ceiling.

What it does

It sits between the camera and its mount, giving both a matched fixing point so the dome sits flush and properly aligned rather than being forced onto a bracket it wasn't designed for.

Where it's used

• Adapting a dome camera to a wall or ceiling bracket
• Bridging a dome camera to a junction box
• EZ-IP dome camera installations specifically, where the base pattern needs an intermediate plate

Build

It's made from metal, which gives it the structural rigidity to carry the camera's weight and hold alignment once it's fixed in place. It's suitable for both indoor and outdoor CCTV installations, so the same plate works whether the camera is in a hallway or under an eave outside.

Before you buy

Check that your dome camera's fixing pattern is one the EZAP005 is designed to bridge, and confirm your bracket or junction box needs an adapter at all — some brackets mount dome cameras directly. If you're planning an EZ-IP install and the base doesn't match what's already fixed to the wall, this plate is the part that closes the gap.