Product Description
A 30m Cat6 patch cable with RJ45 connectors — this is the length you reach for when a camera, NVR, or network point sits a full room or two away from your switch. RJ45-NETWORK-CABLE-CAT6-30M-W is rated Cat6, the standard used for gigabit-capable Ethernet runs with reduced interference compared with older Cat5e cable.
Where it fits
- CCTV installs: carries data (and power, if paired with a PoE switch or injector) from an IP camera back to your NVR or router.
- Home/office networking: extends a wired connection to a room Wi-Fi doesn't reach well.
- General patching: connecting switches, routers, and network points.
What to check before buying
- Length: 30m is generous — measure your actual run first, including any slack for routing round corners, so you're not left short or coiling excess cable.
- Connector fit: confirm your camera, NVR, or switch ports take standard RJ45 — this is the norm for wired network gear.
- Colour: white, chosen to sit less obtrusively against light walls and trim than black cable.
If you're wiring a CCTV system, this cable handles the data link; check separately whether your cameras also need power over this same cable (PoE) or a separate power feed.
Frequently Asked Questions
Can this cable carry power to a CCTV camera as well as data?
On its own it carries data only; powering a camera over the same cable needs PoE (Power over Ethernet) equipment such as a PoE switch or injector.
Is 30m enough for a typical CCTV run?
It's a generous length suited to spanning larger areas or linking devices across different rooms — measure your actual route first to be sure.
Will this work with my router or NVR's network ports?
It terminates in standard RJ45 connectors, the standard fitting for network and CCTV equipment ports.
