Product Description
Toshiba MG Series 18TB: what it's actually for
This is a bare internal hard drive, not a complete recorder — it fits inside an NVR, server, or NAS enclosure that takes a 3.5-inch SATA drive. If you're topping up storage on an existing recorder, check your NVR has a free 3.5" bay and a SATA connector before ordering.
18TB of capacity means long retention windows even at higher recording bitrates, which matters if you're running multiple 4K cameras or want months of footage on hand rather than weeks.
Key specs
- Capacity: 18TB
- Form factor: 3.5-inch
- Interface: SATA (Serial ATA)
- Spindle speed: 7200RPM
- Build: designed for continuous 24/7 operation
Where it fits
Toshiba positions the MG series for enterprise servers and storage arrays, but the same properties — 24/7 duty cycle, RAID suitability, high capacity — are exactly what surveillance storage needs. It's a sensible choice for:
- Video archiving on NVRs or dedicated storage servers
- RAID arrays where several drives run continuously alongside each other
- NAS-based backup for recorded footage
Before you buy
Confirm your recorder or server supports drives above the capacity you're currently running, and check its SATA port is free. This is a single drive; if you need redundancy, you'll need more than one in a RAID setup.
Specifications
- Brand
- Toshiba
Technical Specifications
Frequently Asked Questions
Will this drive fit my existing NVR or DVR?
It's a standard 3.5-inch SATA drive, so it will fit any recorder or server with a free 3.5" bay and SATA connection — check your unit's spec before ordering.
Is 18TB enough for continuous CCTV recording?
That depends on your camera count, resolution and retention needs, but 18TB gives a large buffer for extended storage compared with smaller consumer drives.
Can I use this in a RAID array?
Yes — the MG series is built for continuous 24/7 operation and is designed to work reliably in multi-drive RAID configurations.
Is this a complete recording system?
No, it's a bare internal hard drive only — it needs to be fitted inside a compatible NVR, server or NAS enclosure to work.
