Product Description
These are general-purpose steel wood screws, not a CCTV-specific accessory — useful when you're fitting camera plates, cable trays or a recorder cabinet to a timber structure rather than relying on a camera's own bracket fixings.
Key specs
- Size: 10G x 4 inch — 5.0 x 100mm
- Head: Countersunk, sits flush once driven in
- Material: Steel
- Duty rating: Medium to heavy, for structural wood fixing
Where they're useful on an install
The 100mm length gives deeper penetration than a short screw, which matters where a bracket or backing board needs to bite into something substantial — a stud, a batten, or a plywood back-board behind a recorder or switch cabinet.
The countersunk head sits level with the surface once fitted, so nothing catches cabling or trim run across the fixing point afterwards.
What to check before buying
Confirm the timber or wood-based material (chipboard, plywood) you're fixing into can take a 100mm screw without breaking through the other side, and that 10G gauge suits the load — a heavier bracket may need a thicker fixing than these are rated for.
These are timber fixings only — they're not designed for masonry, metal enclosures, or fixing directly into a camera housing.
Specifications
- Dimensions
- 5.0 × 100 mm
- Screen Size
- 4"
Technical Specifications
Frequently Asked Questions
What size are these screws?
10G x 4 inch, which is 5.0 x 100mm.
Can I use these for masonry or metal enclosures?
No — they're wood screws for timber, chipboard and structural wood fixing only.
Will the screw head sit proud of the surface?
No, the countersunk head sits flush once fully driven in.
What material are they made from?
Steel.
