Product Description
These are Timbermate 5.0 x 25mm countersunk wood screws — steel screws for fixing timber, chipboard and other wood-based materials. On a CCTV or access-control install, this is the size of fixing you reach for when mounting brackets, patress boxes or cable clips onto wooden battens, stud walls or door frames rather than masonry.
The countersunk head sits flush with the surface once driven in, so it won't snag cables or leave a proud edge under a bracket. That matters where the fixing is visible or where a raised screw head would sit proud of a mounting plate.
At 25mm length, penetration is shallow — suited to thinner timber sections or where you don't want the screw punching through the other side of a batten or door frame. For thicker timber or where more holding depth is needed, check whether a longer screw in the range suits the job better before fixing anything permanent.
Key specs
- Size: 5.0 x 25mm (diameter x length)
- Head: Countersunk, for a flush finish
- Material: Steel
- Use: Timber, chipboard and general wood fixing
Where it's used
- Mounting brackets and enclosures onto wooden structures
- Fixing patress boxes or trunking to battens and stud walls
- General carpentry and joinery fixings alongside CCTV or door-entry installs
Specifications
- Brand
- Timbermate
- Product Type
- Wood screw
- Diameter
- 5.0 mm
- Length
- 25 mm
- Material
- Steel
Technical Specifications
Frequently Asked Questions
What size are these screws?
5.0mm diameter by 25mm length, with a countersunk head.
What material are they mounting onto?
Timber, chipboard and other wood-based materials — not masonry or metal.
Will the screw head sit flush?
Yes, the countersunk head is designed to sit flush with the surface once driven in.
What's the screw made from?
Steel.
