Product Description
A 12U cabinet with 300mm depth for housing an NVR, patch panel and small network switch behind a lockable door — built for CCTV and data kit that doesn't need full server depth.
Where this fits
This is a shallow-depth rack: 30cm wide, 30cm deep, 61cm tall. It's sized for NVRs, patch panels, small switches and routers, not deep rack-mount servers. If your recorder or switch is unusually long front-to-back, measure it against the 30cm depth before ordering.
Fixing and access
It can be wall or floor mounted, so it works in a small comms cupboard or standing in a plant room. The front door is lockable tempered glass, letting you check status LEDs without opening up. Removable side panels give access to installed kit, and 19-inch rack rails are adjustable to suit different equipment sizes.
Keeping kit cool and cabled
Front and side vent slots plus a vented rear panel support airflow around powered equipment — worth checking against your NVR's own ventilation needs if it runs warm. Top and bottom cable entry points keep CCTV and network cabling routed tidily rather than trailing through the door seal.
Build
Steel construction with a black coated finish, intended for both commercial and residential installations.
Specifications
- Width
- 30cm
- Depth
- 30cm
- Height
- 61cm
Technical Specifications
Frequently Asked Questions
Will this cabinet fit a standard NVR?
Most compact NVRs fit within the 30cm depth, but check your unit's own depth first since some larger models may not clear the door.
Can it be mounted on a wall as well as the floor?
Yes, it's designed for either wall or floor mounting depending on the space you have available.
Can I see the equipment status without opening the door?
Yes, the front door is lockable tempered glass, so you can check indicator lights while keeping the cabinet secured.
How is cabling routed in and out?
There are cable entry points on both the top and bottom panels for tidy cable management.
