Product Description
This is a wall bracket, not a CCTV item — but it's exactly what many customers need to mount the monitor that sits next to their NVR or recorder. It fits 26"-55" TVs and monitors with a maximum VESA hole pattern of 400x400mm, and it's rated to carry up to 35kg.
Where it fits
For a CCTV setup, this is the mount for your viewing screen — the monitor showing live feeds or playback from your recorder. It's not a camera mount and doesn't relate to camera positioning or night-vision performance.
What to check before ordering
- VESA pattern: measure the four mounting holes on the back of your screen (in mm, width x height). Anything up to 400x400 is covered — bigger than that, and this bracket won't line up.
- Weight: your screen's actual weight must sit at or under 35kg.
- Wall clearance: the arm adjusts from 75mm to 390mm off the wall, which gives space to route cable, sit around a socket, or clear a shelf holding an NVR.
- Swivel: 180° movement lets you angle the screen if the viewing position isn't square-on to the wall — useful in a corner office or a reception desk setup.
Installation hardware and instructions are included, but fitting is down to the buyer or their installer.
Technical Specifications
Frequently Asked Questions
Will this fit my CCTV monitor?
If your monitor is 26"-55" with a VESA hole pattern up to 400x400mm and weighs 35kg or under, yes — check the exact VESA spacing on the back of the screen first.
How far does the screen sit from the wall?
The arm adjusts between 75mm and 390mm from the wall, giving room to clear cable, sockets, or a nearby NVR shelf.
Can I angle the screen if it's not directly facing the viewer?
Yes, it has a 180° swivel range, useful where the viewing position is off to one side rather than square to the wall.
Does this mount include fitting?
No — it comes with mounting hardware and instructions for you or your installer to fit; this listing is for the bracket itself only.
